R&D + Testing Capabilities

Research and development is at the core of our business. We constantly strive to further develop and improve the performance of our UV cured powder coatings. Whether you are simply wondering if UV powder will work for you or you have exact performance requirements, our team will perform coating feasibility studies and trials until the formulation is just right.

Test Standards

Crosshatch Adhesion ASTMD3359, Method A&B
Impact Metal: ASTM D2794
Wood: NEMA LD3-2005, 3.8
Abrasion Resistance ASTM D4060
Pencil Hardness ASTM D3363
Cleanability/Stain Resistance NEMA LD3-2005, 3.4
Color Analysis Spectrophotometer
Light Booth ASTM, D1729
Coating Thickness Measurement
Non-Destructive ASTM D6132
Destructive ASTM D4138
Solvent Resistance PCI #8
Mandrel Bend ASTM D522 Methods A&B
Gloss Level ASTM D523
Boiling Water Resistance NEMA LD3-2005, 3.5
Texture Evaluation PCI Smoothness Standards

Powder Testing Capabilities & Equipment

It is important to have good powder flow and charge properties when electrostatically applying UV powder coatings. Therefore, we perform powder testing to determine the optimum conditions for application.

Our UV powder is performance tested for the following properties:

  • Fluidization
  • Storage stability
  • Particle size distribution
  • Viscosity
  • Cure testing (DSC/FTRIR)

If you have a additional questions or need a specific test performed, please contact us. Our lab is always up for a challenge.